Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Eclipse 180BL Battery Replacement

Introduzione

Following these easy steps will allow you to successfully replace the battery in the device.

Cosa ti serve

  1. Eclipse 180BL Battery Replacement, Battery: passo 1, immagine 1 di 1

    • Remove the two screws located on the bottom of the device with a phillips head screw driver.

    • The two screws can be removed using the PH00 head from the iFixit repair toolkit.

    • Both screws are 1/8 inch in length.

    • The bottom cap will come off to reveal the inside main component.

    Traduci

  2. Eclipse 180BL Battery Replacement: passo 2, immagine 1 di 2 Eclipse 180BL Battery Replacement: passo 2, immagine 2 di 2

    • Remove the main inner component using Spudger, by pushing on the USB port. This will take some force.

    • Hold on the sides with your fingers, and push to release from the top.

    Traduci

  4. Eclipse 180BL Battery Replacement: passo 3, immagine 1 di 3 Eclipse 180BL Battery Replacement: passo 3, immagine 2 di 3 Eclipse 180BL Battery Replacement: passo 3, immagine 3 di 3

    • The plastic LCD cover and the key pad will now be loose; they were held in place by the tension between the case and the internal main component.

    • Locate the large square pack with a black and red wire coming out of it, this is the battery.

    • Cut the red and black wires to remove the old battery.

    Traduci

  5. Eclipse 180BL Battery Replacement: passo 4, immagine 1 di 1

    • To Replace, connect the two new lines ( red and black) between the new battery and the device.

    • You have successfully replaced the battery!

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 21

Tutti i Tempi: 1,350