Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a 5-point pentalobe screwdriver, unscrew the 2 pentalobe on the bottom of the phone near the dock connector.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push the back glass towards the top of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a #000 Phillips screwdriver, unscrew the 2 very small Phillips screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a plastic opener tool, pry up the battery connector shield. Be careful not to lose the smaller antenna connector shield under the top connector sheild.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull upwards on the plastic tab. If it's the first time, you may have to use the plastic pry tool on the outside (right) edge of the battery to loosen battery first.
-
Then, out pops the battery.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.