Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Disconnect the power supply cord from the outlet.
    • Disconnect the power supply cord from the outlet.

  2. Remove the eight screws holding the wood-patterned cover to the microwave frame. The first four screws are located on either side of the microwave front.
    • Remove the eight screws holding the wood-patterned cover to the microwave frame.

    • The first four screws are located on either side of the microwave front.

  3. Remove the additional four screws securing the wood-paneled case to the microwave frame. Remove the additional four screws securing the wood-paneled case to the microwave frame.
    • Remove the additional four screws securing the wood-paneled case to the microwave frame.

  4. Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame. Lift the case upward slowly until the case is free of the microwave. Lift the case upward slowly until the case is free of the microwave.
    • Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.

    • Lift the case upward slowly until the case is free of the microwave.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Samuel

Membro da: 26/09/2012

100 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 2-12, Propen Fall 2012 Membro di Cal Poly, Team 2-12, Propen Fall 2012

CPSU-PROPEN-F12S2G12

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,579