Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Slide both battery latches to the open position.

    • Slide the battery out of the battery bay.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Loosen the five screws that secure the hard-drive compartment cover.

    • Remove the cover and set it aside.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Remove the three screws that secure the hard drive to the computer.

    • One screw is attached to a metal tab on the metal base of the hard drive, and the other two screws are attached to the metal base.

    • Disconnect the hard drive cable connector from the motherboard.

    • Pull the mylar tab to release the hard drive.

    • Lift the hard drive and the hard drive cable out of the computer. You may find it easier to lift the hard drive starting from the side located opposite from the hard drive's connection to the hard drive cable.

Linea Traguardo

Un'altra persona ha completato questa guida.

Johnathan Hammond

Membro da: 02/28/18

44.830 Reputazione

408 Guide realizzate

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.985 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 601