Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Remove the three screws that secure the hard drive to the computer.
Removing the Hard Drive Cable
  • Remove the three screws that secure the hard drive to the computer.

  • One screw is attached to a metal tab on the metal base of the hard drive, and the other two screws are attached to the metal base.

  • Disconnect the hard drive cable connector from the motherboard.

  • Pull the mylar tab to release the hard drive.

  • Lift the hard drive and the hard drive cable out of the computer. You may find it easier to lift the hard drive starting from the side located opposite from the hard drive's connection to the hard drive cable.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.