Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.
-
Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the green fan cover up towards you to reveal the CPU heatsink.
-
Lift the heat sink release lever
-
Remove the heat sink from the CPU and lift it out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully release the ZIF socket - push the lever backwards to release it from the hold down tab and lift it up and to the left until it stops (roughly 90 degrees).
-
Gently lift the CPU straight up and out of the socket. There should be no resistance.
-
The CPU will only fit into the ZIF socket in one orientation so take care when reinserting it. make sure that pin A1 is located correctly
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.