Dell Chromebook 5190 I/O board Replacement

Introduzione

This guide will aid you in replacing your Dell Chromebook 5190 I/O board.

The Dell Chromebook 5190 was released alongside its sister model Dell Chromebook 5190 2-in-1. This guide will focus on the 5190 model that lacks a touchscreen.

The I/O board on your laptop helps physically connect external devices to your computer. If you are having issues with your computer identifying external devices when connected, try the Dell Chromebook 5190 troubleshooting page for possible solutions before replacing the I/O. If you are still experiencing these issues after troubleshooting, you may need a I/O board replacement.

Please make sure your laptop is off before beginning, and remove all cables or devices populating your laptop ports.

Cosa ti serve

Passo 1 Battery

Dell Chromebook 5190 I/O board Replacement, Battery: passo 1, immagine 1 di 1

Before starting, please make sure you have disconnected and removed all devices populating the laptop's ports.
Remove the nine M2.5x7.5 screws located on the bottom side of the laptop.

Modifica

Passo 2

Dell Chromebook 5190 I/O board Replacement: passo 2, immagine 3 di 3

Be cautious, the following instructions are to prevent cracking the base cover.
With the opening tool, pry open the upper left corner by the laptop hinge.
With the opening tool, pry open the upper right corner by the laptop hinge.
Lift off base cover.

Modifica

Passo 3

Unscrew and remove the M2x3 screw holding the silver metal brackets labeled "Battery Bracket" located on the top left side of the battery.
Unscrew and remove the M2x3 screw holding the silver metal brackets labeled "Battery Bracket" located on the top right side of the battery.

Modifica

Passo 4

Remove the clear adhesive tape on the system board from the battery cable from where it's seated above the battery.
Pull out the keyboard cable toward you to disconnect it.

Modifica