Aggiusta la tua roba Comunità Store

D-Link DCS-825L LED Light Cover Replacement

Introduzione

Does the LED light cover have a crack on the outer cap? Is it yellowed or discolored? This guide will show you the way to replace the LED light cover for your Wi-Fi Baby Camera.

Cosa ti serve

  1. D-Link DCS-825L LED Light Cover Replacement, Accent Ring: passo 1, immagine 1 di 1

    • Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.

    Traduci

  2. D-Link DCS-825L LED Light Cover Replacement: passo 2, immagine 1 di 1

    • Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.

    Traduci

  3. D-Link DCS-825L LED Light Cover Replacement: passo 3, immagine 1 di 1

    • Replace your accent ring with whichever color you choose.

    Traduci

  4. D-Link DCS-825L LED Light Cover Replacement, Back Casing: passo 4, immagine 1 di 2 D-Link DCS-825L LED Light Cover Replacement, Back Casing: passo 4, immagine 2 di 2

    • Remove one Phillips #2 screw from each side of the camera lens.

    Traduci

  6. D-Link DCS-825L LED Light Cover Replacement: passo 5, immagine 1 di 3 D-Link DCS-825L LED Light Cover Replacement: passo 5, immagine 2 di 3 D-Link DCS-825L LED Light Cover Replacement: passo 5, immagine 3 di 3

    • Pull the Wi-Fi Baby Camera open.

    • It should be easily done after the screws are removed.

    Traduci

  7. D-Link DCS-825L LED Light Cover Replacement: passo 6, immagine 1 di 2 D-Link DCS-825L LED Light Cover Replacement: passo 6, immagine 2 di 2

    • Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.

    Traduci

  8. D-Link DCS-825L LED Light Cover Replacement: passo 7, immagine 1 di 3 D-Link DCS-825L LED Light Cover Replacement: passo 7, immagine 2 di 3 D-Link DCS-825L LED Light Cover Replacement: passo 7, immagine 3 di 3

    • Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.

    Traduci

  9. D-Link DCS-825L LED Light Cover Replacement, LED Light Cover: passo 8, immagine 1 di 1

    • Grab the white cylinder with your thumb and index finger.

    Traduci

  10. D-Link DCS-825L LED Light Cover Replacement: passo 9, immagine 1 di 1

    • Gently lift the cylinder up from its placement in your Wi-Fi Baby Camera.

    Traduci

  11. D-Link DCS-825L LED Light Cover Replacement: passo 10, immagine 1 di 1

    • Remove the white cylinder completely to replace it.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Annalise Leclair

Membro da: 10/09/18

97 Reputazione

1 Guida realizzata

Distintivi: 3

Team

USF Tampa, Team S1-G5, Leahy Fall 2018 Membro di USF Tampa, Team S1-G5, Leahy Fall 2018

USFT-LEAHY-F18S1G5

4 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 292