Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back panel by using the plastic opening tool to carefully pry around the panel's edges.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 3mm Philips #00 screws around the large silver battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 4mm Philips #00 screws on the edges of the circuit board.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the ribbon cable from the exposed side of circuit board near the headphone jack.
-
Carefully lift up the circuit board on the detached side.
-
Disconnect the second ribbon cable by pulling the end of the ribbon from its housing on the circuit board with tweezers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the opposite end of the device: Remove the ribbon cable in between the speakers at the end of the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
There are three additional 3mm Philips #00 screws underneath the circuit board that need to be removed.
-
Now, remove the battery and circuit board with the LCD attached and turn it over so the screen is facing upwards.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully pry the thin, metal frame from around the LCD screen.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
2 Commenti
Where can I buy Creative Ziio 7" LCD Scren?
i need LCD Creative Labs ZIIO 7 Inch Tablet, where i can buy?... please help me... thx before...