Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Remove the ribbon cable from the exposed side of circuit board near the headphone jack. Carefully lift up the circuit board on the detached side. There is another ribbon cable attached to the underside of the circuit board.
  • Remove the ribbon cable from the exposed side of circuit board near the headphone jack.

  • Carefully lift up the circuit board on the detached side.

  • There is another ribbon cable attached to the underside of the circuit board.

  • Disconnect the second ribbon cable by pulling the end of the ribbon from its housing on the circuit board with tweezers.

  • The circuit board is extremely delicate. Move carefully and don't rush on this step!

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.