Aggiusta la tua roba Comunità Store

Creative Zen V Plus Headphone Jack Replacement

Introduzione

Before replacing the headphone jack, see the troubleshooting section for the Creative Zen V Plus. You'll also need to know how to desolder and solder components so be sure to learn how with Come saldare e dissaldare componenti elettrici!

Cosa ti serve

  1. Creative Zen V Plus Headphone Jack Replacement, Prerequisite Only: passo 1, immagine 1 di 1

    • Find the grooves around the buttons on the front and carefully remove the panel. This can be done without the use of any tools.

    Modifica

  2. Creative Zen V Plus Headphone Jack Replacement: passo 2, immagine 1 di 1

    • Using a plastic opening tool, place the skinny flat end between the groove running along side of the device.

    • Using a twisting motion, detach the control panel from the device

    Modifica

  3. Creative Zen V Plus Headphone Jack Replacement: passo 3, immagine 1 di 1

    • Find the groove around the outside of the green section. Use an ESD safe spudger to slowly lift the plastic panel up.

    Modifica

  5. Creative Zen V Plus Headphone Jack Replacement: passo 4, immagine 1 di 2 Creative Zen V Plus Headphone Jack Replacement: passo 4, immagine 2 di 2

    • After removing the green section, find the groove around the display. Insert a ESD safe spudger and carefully lift the display.

    Modifica

  6. Creative Zen V Plus Headphone Jack Replacement: passo 5, immagine 1 di 1

    • The display can lift up the display but be sure not to damage any of the cables connecting it to the mother board.

    • Remove the screw located under the display using the 00 Phillips head screwdriver.

    Modifica

  7. Creative Zen V Plus Headphone Jack Replacement: passo 6, immagine 1 di 3 Creative Zen V Plus Headphone Jack Replacement: passo 6, immagine 2 di 3 Creative Zen V Plus Headphone Jack Replacement: passo 6, immagine 3 di 3

    • Pull up on the motherboard and display. It is glued to the base so it will require a little force. Be careful though, as the board is fragile.

    Modifica

  8. Creative Zen V Plus Headphone Jack Replacement, Headphone Jack: passo 7, immagine 1 di 1

    • Locate the circles of metal holding the headphone jack to the logic board. Using a soldering iron, de-solder these circles and remove the headphone jack.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Joshua Meines

Membro da: 10/19/16

316 Reputazione

3 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

IUPUI, Team 2-5, Baechle Fall 2016 Membro di IUPUI, Team 2-5, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G5

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 282