Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

  1. Turn the calculator over so the blue Texas Instruments logo is facing you. Slide the blue cover downwards until it is completely removed from the calculator.
    • Turn the calculator over so the blue Texas Instruments logo is facing you.

    • Slide the blue cover downwards until it is completely removed from the calculator.

  2. If the keypad is not already connected, skip the next 2 steps.
    • If the keypad is not already connected, skip the next 2 steps.

    • Turn the calculator over so the keypad is facing down.

    • Locate the sliding latch towards the bottom of the calculator.

  3. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  4. Slide the latch to the right to release the keypad. At the same time, pull the keypad downwards.
    • Slide the latch to the right to release the keypad.

    • At the same time, pull the keypad downwards.

  5. Take note of where the keypad and the calculator connect. Take note of where the keypad and the calculator connect.
    • Take note of where the keypad and the calculator connect.

  6. Slide the keypad directly into where it connects to the calculator until you hear a click.  Readjust as necessary. Slide the keypad directly into where it connects to the calculator until you hear a click.  Readjust as necessary. Slide the keypad directly into where it connects to the calculator until you hear a click.  Readjust as necessary.
    • Slide the keypad directly into where it connects to the calculator until you hear a click. Readjust as necessary.

  7. Press the "ON" button to make sure that the calculator turns on.  If the calculator turns on correctly, you have properly inserted the keypad.
    • Press the "ON" button to make sure that the calculator turns on. If the calculator turns on correctly, you have properly inserted the keypad.

Conclusione

If the keypad was inserted properly, the calculator should turn on without any errors.

Un'altra persona ha completato questa guida.

Mariel Sanchez

Membro da: 27/09/2012

22 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 7-52, Forte Fall 2012 Membro di Cal Poly, Team 7-52, Forte Fall 2012

CPSU-FORTE-F12S7G52

5 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 95

Tutti i Tempi: 12,424