Aggiusta la tua roba Comunità Store

Computer King Muffin Kinder 7 Logic Board Replacement

Introduzione

To complete this guide, you will need to disassemble your device and use a soldering iron to replace all the wires from the logic board.

Make sure to power off the device before you begin to take apart your device. Not doing so could potentially cause harm.

Cosa ti serve

  1. Computer King Muffin Kinder 7 Logic Board Replacement, Logic Board: passo 1, immagine 1 di 2 Computer King Muffin Kinder 7 Logic Board Replacement, Logic Board: passo 1, immagine 2 di 2

    • Use the plastic opening tool help push out the microSD card from the microSD slot.

    Modifica

  2. Computer King Muffin Kinder 7 Logic Board Replacement: passo 2, immagine 1 di 1

    • Use the plastic opening tool to unclip the plastic front from the plastic back. Use the MicroSD slot to initially start the unclipping.

    Modifica

  3. Computer King Muffin Kinder 7 Logic Board Replacement: passo 3, immagine 1 di 2 Computer King Muffin Kinder 7 Logic Board Replacement: passo 3, immagine 2 di 2

    • Unscrew the nine 3.0 mm Phillips #00 screws.

    Modifica

  5. Computer King Muffin Kinder 7 Logic Board Replacement: passo 4, immagine 1 di 1

    • The battery is glued onto the black plastic. Use the plastic opening tool to pry the battery from the black plastic

    Modifica

  6. Computer King Muffin Kinder 7 Logic Board Replacement: passo 5, immagine 1 di 3 Computer King Muffin Kinder 7 Logic Board Replacement: passo 5, immagine 2 di 3 Computer King Muffin Kinder 7 Logic Board Replacement: passo 5, immagine 3 di 3

    • Unsolder the 11 red, back, and grey wires connected to the logic board.

    • Tips on how to solder can be found here.

    Modifica

  7. Computer King Muffin Kinder 7 Logic Board Replacement: passo 6, immagine 1 di 3 Computer King Muffin Kinder 7 Logic Board Replacement: passo 6, immagine 2 di 3 Computer King Muffin Kinder 7 Logic Board Replacement: passo 6, immagine 3 di 3

    • Use the flat end of the spudger to lift the black panels covering the three ribbon cables connected to the logic board.

    Modifica

  8. Computer King Muffin Kinder 7 Logic Board Replacement: passo 7, immagine 1 di 1

    • Pull the three ribbon cables out so that they are no longer connected to the logic board.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Katherine

Membro da: 01/22/15

439 Reputazione

3 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

UWT Liner: Group 2 Membro di UWT Liner: Group 2

Community

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 12

Tutti i Tempi: 245