Aggiusta la tua roba Comunità Store

ColecoVision Cartridge Reader Replacement

Introduzione

The purpose of this guide is to communicate steps on how to replace or repair the cartridge reader on a ColecoVision.

Cosa ti serve

  1. ColecoVision Cartridge Reader Replacement, Cartridge Reader: passo 1, immagine 1 di 1

    • Flip the console upside down and remove the eight 15mm Phillips #1 screws.

    Modifica

  2. ColecoVision Cartridge Reader Replacement: passo 2, immagine 1 di 2 ColecoVision Cartridge Reader Replacement: passo 2, immagine 2 di 2

    • Use the metal spudger along the bottom rim of the front panel to safely remove the top of the console. Set aside the top.

    Modifica

  4. ColecoVision Cartridge Reader Replacement: passo 3, immagine 1 di 2 ColecoVision Cartridge Reader Replacement: passo 3, immagine 2 di 2

    • Remove the two 15mm Phillips #1 screws holding the casing in place.

    • Remove the casing to reveal the cartridge reader.

    Modifica

  5. ColecoVision Cartridge Reader Replacement: passo 4, immagine 1 di 3 ColecoVision Cartridge Reader Replacement: passo 4, immagine 2 di 3 ColecoVision Cartridge Reader Replacement: passo 4, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Desoldering Pump
    $3.99
    Compra

    • Desolder the sides of the cartridge reader using the soldering iron and desolder pump.

    • Refer to this soldering technique guide for reference

    • Patiently wait for the cartridge reader to cool down after being desoldered.

    • It's very important to remove all the tin from the motherboard and cartridge reader before lifting it from the motherboard. Failure to do so could damage the motherboard.

    • Carefully lift up the cartridge reader. A plastic spudger might be helpful in order to easily remove the cartridge reader.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Anastazia Kidder

Membro da: 10/17/18

109 Reputazione

1 Guida realizzata

Distintivi: 3

Team

UW Tacoma, Team S1-G2, Rose Fall 2018 Membro di UW Tacoma, Team S1-G2, Rose Fall 2018

UWT-ROSE-F18S1G2

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 19

Tutti i Tempi: 1,521