Salta al contenuto principale

Introduzione

Be careful not to crack the screen or the faceplate when removing from the tablet.

Ricambi

  1. Wedge the metal spudger in between the faceplate and the body of the tablet. Carefully pry the faceplate away from the body of the tablet. Carefully pry the faceplate away from the body of the tablet.
    • Wedge the metal spudger in between the faceplate and the body of the tablet.

    • Carefully pry the faceplate away from the body of the tablet.

  2. Carefully lift the screen and set it face down on a soft surface to not scratch it.
    • Carefully lift the screen and set it face down on a soft surface to not scratch it.

  3. Lift the speaker out of the speaker housing. Lift the speaker out of the speaker housing. Lift the speaker out of the speaker housing.
    • Lift the speaker out of the speaker housing.

  4. Remove the positive and negative speaker wires by heating up the solder on the motherboard. Here are some tips on how to Solder.
    • Remove the positive and negative speaker wires by heating up the solder on the motherboard.

    • Here are some tips on how to Solder.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Daniel Ulrich

Membro da: 29/09/2016

494 Reputazione

3 Guide realizzate

Team

IUPUI, Team 3-4, Harley Fall 2016 Membro di IUPUI, Team 3-4, Harley Fall 2016

IUPUI-HARLEY-F16S3G4

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 147