Aggiusta la tua roba Comunità Store

Circular Saw Blade Replacement

Introduzione

Whether your circular saw blade is worn out, or you just want to switch it out for a different style, it’s really easy to swap out blades on pretty much any circular saw—and it takes just a few minutes.

This guide uses a Ryobi P504G circular saw, but the process is very similar for most circular saws.

Cosa ti serve

  1. Circular Saw Blade Replacement, Blade: passo 1, immagine 1 di 2 Circular Saw Blade Replacement, Blade: passo 1, immagine 2 di 2

    • Unplug your circular saw or remove the battery before replacing the blade!

    Modifica

  2. Circular Saw Blade Replacement: passo 2, immagine 1 di 3 Circular Saw Blade Replacement: passo 2, immagine 2 di 3 Circular Saw Blade Replacement: passo 2, immagine 3 di 3

    • Press and hold down the blade lock button to keep the blade from turning while you loosen it.

    • Loosen the arbor's hex bolt in the center of the blade using a 5mm hex key, making sure to loosen clockwise since the bolt threads are reversed.

    • Your circular saw may already come with a hex key.

    Modifica

  3. Circular Saw Blade Replacement: passo 3, immagine 1 di 2 Circular Saw Blade Replacement: passo 3, immagine 2 di 2

    • Once loosened, continue unscrewing the bolt with your fingers and remove it from the saw.

    Modifica

  5. Circular Saw Blade Replacement: passo 4, immagine 1 di 2 Circular Saw Blade Replacement: passo 4, immagine 2 di 2

    • Remove the arbor washer.

    Modifica

  6. Circular Saw Blade Replacement: passo 5, immagine 1 di 3 Circular Saw Blade Replacement: passo 5, immagine 2 di 3 Circular Saw Blade Replacement: passo 5, immagine 3 di 3

    • Completely retract the blade guard.

    • You can hold the blade guard in place with a clamp while you change the blade.

    Modifica

  7. Circular Saw Blade Replacement: passo 6, immagine 1 di 3 Circular Saw Blade Replacement: passo 6, immagine 2 di 3 Circular Saw Blade Replacement: passo 6, immagine 3 di 3

    • Set the circular saw on its side and carefully lift up the blade to unseat it from the arbor.

    • Slowly slide out the blade.

    • Use extreme caution when handling the blade!

    Modifica

  8. Circular Saw Blade Replacement: passo 7, immagine 1 di 1

    • When inserting the new blade, be sure to note its rotation and install it in the correct orientation.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

Craig Lloyd

Membro da: 02/10/16

35.418 Reputazione

82 Guide realizzate

Distintivi: 41

+38 altri distintivi

3 Commenti

Hello!
I learned a lot of important things, but I have a Question that is this Circular Saw perfect to cut Concrete Pavers?

F6 Adhesive Tape - Replica

I think you need a cutting disc in your circular saw

to cut concrete.

Toon Konings - Replica

the problem is that cutting concrete with a concrete disk produces a lot of concrete dust. It will kill your machine. It is not possible to stop the dust by pouring water as you would do with a tile cutting machine.

vief - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 69

Ultimi 30 Giorni: 290

Tutti i Tempi: 6,744