Salta al contenuto principale
Charging System reset

Charging System reset

Austin Walter

Austin Walter e un altro collaboratore

Ultimo aggiornamento il September 7, 2023

30 secondi
Molto facile
Guida fornita dalla comunità

Introduzione

Vai al passo 1

Reset a Roomba discovery charging system that is malfunctioning

Cosa ti serve

Strumenti

  1. Charging System reset, Flip over Roomba: passo 1, immagine 1 di 1
    • Flip over Roomba

  2. Charging System reset, Remove the battery: passo 2, immagine 1 di 3 Charging System reset, Remove the battery: passo 2, immagine 2 di 3 Charging System reset, Remove the battery: passo 2, immagine 3 di 3
    • Depress the tabs on the sides of the battery and lift it out.

    • You may need to use descent force when lifting up.

  3. Charging System reset, Reset the roomba: passo 3, immagine 1 di 2 Charging System reset, Reset the roomba: passo 3, immagine 2 di 2
    • Flip Roomba back over

    • Hold down Roomba's power button for 15 seconds.

  4. Charging System reset, Reinstall the battery.: passo 4, immagine 1 di 3 Charging System reset, Reinstall the battery.: passo 4, immagine 2 di 3 Charging System reset, Reinstall the battery.: passo 4, immagine 3 di 3
    • Flip Roomba back over.

    • Reinsert the battery.

    • Flip Roomba over again.

  5. Charging System reset, Charge and run Roomba: passo 5, immagine 1 di 1
    • Charge Roomba for 16 hours and run on MAX cycle.

    • You should be done!

Conclusione

Perform an uninterrupted 16 hour charge. Then run on MAX cleaning cycle.

Austin Walter

Membro da: 01/16/23

1.055 Reputazione

5 Guide realizzate

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 11

Tutti i Tempi: 203