Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the (6) six 1.5mm Phillips screws holding on the bottom cover of the speaker using a Phillips #0 screwdriver.
-
Lift the cover straight up and set the cover aside.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pull the white ribbon from the connector on the top side of the power board.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the (4) four 1.5 cm screws connecting the power board to the speaker.
-
Remove the (2) two 1 cm screws connecting the power board to the speaker.
-
Gently lift the board up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the white cable by pressing on the side of the connector with a tab and pulling backwards.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pull the thinner white ribbon towards the center of the board.
-
Squeeze the plastic sides of the plug and pull straight down to remove this ribbon.
-
Remove the motherboard.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.
7 Commenti
But how do I purchase a new motherboard?
Thank you for excellent information and instruction. Can you please send some link to order a new motherboard?
Thank you for the tutorial. How do I purchase a new motherboard ?
Any known place to purchase a replacement board?