Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Remove the (4) four 1.5 cm screws connecting the power board to the speaker. Remove the (2) two 1 cm screws connecting the power board to the speaker.
  • Remove the (4) four 1.5 cm screws connecting the power board to the speaker.

  • Remove the (2) two 1 cm screws connecting the power board to the speaker.

  • Gently lift the board up.

  • When lifting the board, be careful of the two ribbons located underneath the board. Don't lift the board straight up, instead tilt it towards the cables. As shown in picture 2.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.