Aggiusta la tua roba Comunità Store

Beats Solo 3 Charging Port Replacement

Introduzione

This is a charging port replacement guide for the Beats Solo 3 Headphones, Model number A1796. Symptoms that suggest the need for a charging port replacement can be found on our troubleshooting page.

Cosa ti serve

  1. Beats Solo 3 Charging Port Replacement, Charging Port: passo 1, immagine 1 di 1

    • Use a nylon or metal spudger to carefully remove the ear pad from the right ear cup.

    • Be careful to not rip the ear pad fabric with your tools.

    Modifica

  2. Beats Solo 3 Charging Port Replacement: passo 2, immagine 1 di 1

    • Use a Phillips #00 screwdriver to remove the seven screws that hold the speaker in place.

    • There are two screws in the big red circle at the bottom.

    Modifica

  4. Beats Solo 3 Charging Port Replacement: passo 3, immagine 1 di 1

    • Desolder all wires connecting the circuit panel to the rest of the device.

    • There are two wires in the big red circle at the bottom and one in the small red circle above.

    Modifica

  5. Beats Solo 3 Charging Port Replacement: passo 4, immagine 1 di 2 Beats Solo 3 Charging Port Replacement: passo 4, immagine 2 di 2

    • After you desolder all wires you are able to remove and replace the charging port.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 11

Ultimi 7 Giorni: 39

Ultimi 30 Giorni: 193

Tutti i Tempi: 4,705