Salta al contenuto principale

Introduzione

Use this guide in order to replace a damaged/drained battery in your BLU Studio 5.0 II. Phone must be turned off before starting to replace the battery.

  1. Turn off your phone before disassembling the device.
    • Turn off your phone before disassembling the device.

    • Locate the small opening on the bottom corner of the back case.

  2. Use your finger to open the back case by slowly pulling it on the open slot. Once the case is lifted on the corner, slide your finger along the edge of the phone to remove the rest of the case.
    • Use your finger to open the back case by slowly pulling it on the open slot.

    • Once the case is lifted on the corner, slide your finger along the edge of the phone to remove the rest of the case.

  3. Locate the opening slot at the bottom of the battery. Use your finger to lift the battery and remove it from the case. Use your finger to lift the battery and remove it from the case.
    • Locate the opening slot at the bottom of the battery.

    • Use your finger to lift the battery and remove it from the case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Ricardo Sarabia

Membro da: 09/02/2016

1.030 Reputazione

6 Guide realizzate

Team

USF Tampa, Team 7-5, Cheng Spring 2016 Membro di USF Tampa, Team 7-5, Cheng Spring 2016

USFT-CHENG-S16S7G5

3 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 617