BLU Life XL Charging Port Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

Replacing the charging port on your BLU Life XL device is an effective method of attempting repair of charging issue. This guide shows how one may replace the internal lower PCB unit, where the charging port is located.

Cosa ti serve

Passo 1 Battery

BLU Life XL Charging Port Replacement, Battery: passo 1, immagine 1 di 3

BLU Life XL Charging Port Replacement, Battery: passo 1, immagine 2 di 3

BLU Life XL Charging Port Replacement, Battery: passo 1, immagine 3 di 3

Turn the device off by holding down the power button for up to 5 seconds and then tapping the "Power off" button on the screen.
Remove the rear cover using your hands at the lip on the device back cover. No tools required.

Traduci

Passo 2

BLU Life XL Charging Port Replacement: passo 2, immagine 3 di 3

Remove the old battery.
For optimal performance, calibrate your newly installed battery: Drain battery below 10%, then charge uninterrupted to 100%.

Traduci

Passo 3 Charging Port

BLU Life XL Charging Port Replacement, Charging Port: passo 3, immagine 1 di 2

BLU Life XL Charging Port Replacement, Charging Port: passo 3, immagine 2 di 2

Remove twelve 3mm Phillips #000 screws from the rear plate.

Traduci

Passo 4

Remove the plastic frame on the device using an opening tool.
Firmly press the tool into the gap between the front glass and rear plate.
The gap is located on all sides of the phone.
Run the tool through this gap along the entire edge of the phone to separate the plastic frame from the phone.