Introduzione

This repair guide will help you with the following:

  • install the right headphone cable
  • fix sound in right ear
Remove the ear pads by peeling them away from the grill.
  • Remove the ear pads by peeling them away from the grill.

Aggiungi Commento

Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.
  • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

Aggiungi Commento

  • Remove the speaker from the grill by pulling it out.

  • Remove the speaker carefully so you do not rip the wires out.

Aggiungi Commento

  • Remove the wires by de-soldering both the red and yellow wires using the soldering iron and desoldering wick. If you need assistance, reference How To Solder and Desolder Connections.

  • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

Aggiungi Commento

  • Connect the the new red and yellow wires by re-soldering the wires using the soldering iron. If you need assistance, reference How To Solder and Desolder Connections.

  • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Melanie Reis

Membro da: 11/01/2013

121 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 17-19, Forte Winter 2013 Membro di Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Membri

6 Guide realizzate

Where can i buy a replacement cable? Cant seem to find it anywhere.

Stefan Rasmussen - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 43

Tutti i Tempi: 2,396