Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Before disassembling your Atari Lynx, be sure the device is powered off.
-
Remove any game in the console by opening the right latch and sliding the game to the right.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.
-
Pinch the rear panel with your fingers and lift away from the Atari.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder both the black and red wire as shown.
-
If you need help with basic desoldering, click here.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the white wire and then the red wire as shown.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the white wire as shown in order for the battery pack to be completely removed from the device.
-