Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the laptop upside down so that the back of the laptop faces you.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the following ten Phillips #0 screws from the bottom of the laptop:
-
Six 13mm screws.
-
Four 11mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a plastic opening tool, pry up the palm rest from the bottom half of the laptop.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF sockets.
-
Pull the ribbon cables out of their sockets.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 6mm Phillips #0 screw from the Wi-Fi card.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the Wi-Fi card out of the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the antenna cable from the Wi-Fi chip.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.