Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the laptop upside down so that the back of the laptop faces you.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the following ten Phillips #0 screws from the bottom of the laptop:
-
Six 13mm screws.
-
Four 11mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a plastic opening tool, pry up the palm rest from the bottom case of the laptop.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to flip up the retaining flaps on both keyboard ribbon cable ZIF sockets.
-
Pull the ribbon cables out of their sockets.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three 6mm Phillips #0 screws from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the Wi-Fi card out of the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the hard drive by pulling it towards the right, and removing it from the laptop case
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.
2 Commenti
Thanx a million
is it possible to upgrade the hard drive of any laptop? from 500GB to 1T?