Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding the device firmly, wedge the iFixit Opening Tool into the crease along the outer edge of the device (as shown in the image).
-
Slowly, grind the iFixit Opening Tool into the crease along the outer edges of the device until the entire back cover loosens.
-
Then, remove the back cover from the device.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the speaker from the case using the iFixit Opening Tool.
-
Lift the speaker up from the device to remove the speaker wires from their groove in the case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the speaker wires from the motherboard.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.