Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Amazon Echo Woofer Replacement

Introduzione

This guide will show you how to replace the woofer, the speaker in the Amazon Echo responsible for the low-frequency bass. This guide should be helpful if your Echo is lacking bass or sounds otherwise distorted.

Cosa ti serve

  1. Amazon Echo Woofer Replacement, Power and Speaker Driver Board: passo 1, immagine 1 di 1

    • Power off and unplug your Echo before disassembly. Failure to do so could result in injury or damage to the device.

    • Peel off the rubber footing from the bottom of the Echo.

    • Do not pull the rubber footing too hard, as it could stretch out of shape. Use a spudger to help remove the foot if you have any trouble.

    Traduci

  2. Amazon Echo Woofer Replacement: passo 2, immagine 1 di 3 Amazon Echo Woofer Replacement: passo 2, immagine 2 di 3 Amazon Echo Woofer Replacement: passo 2, immagine 3 di 3

    • Remove the four 42.8 mm T10 Torx screws from the bottom of the Echo.

    Traduci

  3. Amazon Echo Woofer Replacement: passo 3, immagine 1 di 1

    • Slowly lift the plate containing the board. Be careful not to disconnect any of the wires.

    Traduci

  4. Amazon Echo Woofer Replacement: passo 4, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Using tweezers, carefully disconnect the two red and black cables from their sockets on the board.

    • Tugging on the wires may damage the device. Pull from the plastic connectors instead.

    Traduci

  6. Amazon Echo Woofer Replacement: passo 5, immagine 1 di 2 Amazon Echo Woofer Replacement: passo 5, immagine 2 di 2

    • Lift the brown plastic latch on the ZIF connector securing the driver board ribbon cable.

    • Pull the ribbon cable from its connector. The plate and board should now be free from the Echo.

    Traduci

  7. Amazon Echo Woofer Replacement: passo 6, immagine 1 di 3 Amazon Echo Woofer Replacement: passo 6, immagine 2 di 3 Amazon Echo Woofer Replacement: passo 6, immagine 3 di 3

    • Using the spudger, pull back the two plastic clips on the plate.

    • Lift the board up and pull it away from the plate.

    Traduci

  8. Amazon Echo Woofer Replacement, Tweeter Assembly: passo 7, immagine 1 di 2 Amazon Echo Woofer Replacement, Tweeter Assembly: passo 7, immagine 2 di 2

    • Remove the plastic plate from the bottom of the device. Then remove the plastic shrouding.

    Traduci

  9. Amazon Echo Woofer Replacement: passo 8, immagine 1 di 1

    • Peel off the black fabric wrapped around the Echo.

    • Be careful not to rip the fabric. Use a spudger to help remove the adhesive if you have any trouble.

    Traduci

  10. Amazon Echo Woofer Replacement: passo 9, immagine 1 di 3 Amazon Echo Woofer Replacement: passo 9, immagine 2 di 3 Amazon Echo Woofer Replacement: passo 9, immagine 3 di 3

    • Remove the four 42.8 mm T10 Torx screws around the tweeter.

    • Lift the tweeter and its attached housing from the device.

    Traduci

  11. Amazon Echo Woofer Replacement, Woofer: passo 10, immagine 1 di 1

    • Lift the woofer out of the Echo.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Alexander Albert

Membro da: 02/04/16

1.145 Reputazione

6 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

USF Tampa, Team 3-3, Wollert Spring 2016 Membro di USF Tampa, Team 3-3, Wollert Spring 2016

USFT-WOLLERT-S16S3G3

4 Membri

12 Guide realizzate

3 Commenti

Where can you buy a replacement woofer?

adam mierzwa - Replica

My exact question.

Marty Koenig -

Could you post the dimension of the woofer unit? Its depth and diameter (and possibly screw holes location/diameter)? That would be very useful. Thank you.

No Body - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 27

Tutti i Tempi: 7,828