Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently push down on the two tabs at the top of the battery door.
-
While holding them down, slowly pull the door towards you.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once the door is open, use your hand to pull out the four batteries.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry off the control panel on top of the speaker using the metal spudger. You may need to use a lot of force.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #1 screwdriver, remove the two 7mm screws that hold the volume button circuit board to the control panel.
-
Also remove the single 7mm screw from the power button circuit board on the opposite side.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the three solders joints connecting the wires to the volume button circuit board.
-
Do the same to the power button circuit board on the other side (the board with only one screw).
-
Pull out the wires using a lot of force.
-