Salta al contenuto principale

Alcatel One Touch Pop 7 Microphone Replacement

Cosa ti serve

  1. Alcatel One Touch Pop 7  Microphone Replacement, Back Cover: passo 1, immagine 1 di 1
    • Begin by opening SD port cover as this is the best location to start prying.

  2. Alcatel One Touch Pop 7  Microphone Replacement: passo 2, immagine 1 di 1
    • Use the plastic opening tool to pry around the edges of the back cover until it pops off.

  3. Alcatel One Touch Pop 7  Microphone Replacement, Microphone: passo 3, immagine 1 di 1
    • Disconnect battery by pulling up on the ZIF connector with precision tweezers for safety.

  4. Alcatel One Touch Pop 7  Microphone Replacement: passo 4, immagine 1 di 1
    • Remove the Microphone from it's slot with the precision tweezers.

  5. Alcatel One Touch Pop 7  Microphone Replacement: passo 5, immagine 1 di 1
    • Solder the wires off of the motherboard with a soldering iron while holding the wires with the precision tweezers. For information on how to solder safely and correctly go to this link: Come saldare e dissaldare componenti elettrici

Conclusione

To reassemble your device, follow these instructions in reverse order.

Philip Schenck

Membro da: 03/20/18

181 Reputazione

2 Guide realizzate

Team

IUPUI, Team S6-G2, Baechle Spring 2018 Membro di IUPUI, Team S6-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S6G2

3 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 821