Introduzione

If you're noticing that Alcatel Fierce 4's Front camera is not functioning well and has black spots or slow but you are not ready to upgrade your phone and you like it. It’s the time to replace the camera. Follow this guide from start to finish!

  1. Using a plastic opening tool, pry the back cover off of the phone.
    • Using a plastic opening tool, pry the back cover off of the phone.

    Aggiungi Commento

  2. Remove the seventeen Phillips #000 screws from the mid-frame.
    • Remove the seventeen Phillips #000 screws from the mid-frame.

    Aggiungi Commento

    • Pry off the mid-frame using a plastic opening tool, working your way around the perimeter.

    Aggiungi Commento

    • Use a plastic opening tool to disconnect all of the cables on the motherboard.

    • Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.

    Aggiungi Commento

    • Remove the motherboard from the phone.

    Aggiungi Commento

    • Carefully pry up the battery with a plastic opening tool, or your hands.

    Aggiungi Commento

    • Use a plastic opening tool to pry up the camera connector from the motherboard.

    • Remove the camera.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Rawan

Membro da: 22/02/2018

617 Reputazione

4 Guide realizzate

Team

USF Tampa, Team S1-G2, Cagle Spring 2018 Membro di USF Tampa, Team S1-G2, Cagle Spring 2018

USFT-CAGLE-S18S1G2

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 23