Introduzione

Alcatel Fierce 4 Camera is not working well? black spots? Might be the time for a replace. Don’t waste your money and let someone do it for you. You can do it using this guide

Using a plastic opening tool, pry the back cover off of the phone.
  • Using a plastic opening tool, pry the back cover off of the phone.

Aggiungi Commento

Remove the seventeen Phillips #000 screws from the mid-frame.
  • Remove the seventeen Phillips #000 screws from the mid-frame.

Aggiungi Commento

  • Pry off the mid-frame using a plastic opening tool, working your way around the perimeter.

Aggiungi Commento

  • Use a plastic opening tool to disconnect all of the cables on the motherboard.

  • Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.

Aggiungi Commento

  • Remove the motherboard from the phone.

Aggiungi Commento

  • Carefully pry up the battery with a plastic opening tool, or your hands.

Aggiungi Commento

  • Remove the rubber piece surrounding the camera.

Aggiungi Commento

  • Use a plastic opening tool to pry up the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Rawan

Membro da: 22/02/2018

617 Reputazione

4 Guide realizzate

Team

USF Tampa, Team S1-G2, Cagle Spring 2018 Membro di USF Tampa, Team S1-G2, Cagle Spring 2018

USFT-CAGLE-S18S1G2

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 24