Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the thirteen 6.0mm screws on the back panel using your Phillips #1 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the back panel open with the plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 6.0mm screws securing the battery with your Phillips #1 screwdriver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully pull out the battery wire connected to the battery port.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slowly lift the battery to remove it from the Chromebook.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Phillips #1 screwdriver to remove the two 3.1mm screws from the LED PCB.
-
Lift the LED PCB up with your fingers and flip it over revealing the ZIF connector.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Set the LED PCB down and use your spudger to flip up the white bar of the ZIF connector.
-
Pull the ribbon cable out with your fingers.
-