Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect all power from the laptop and turn over so the bottom is facing you.
-
Remove the twelve 07.mm Phillips #0 screws from the back cover.
-
Work a plastic opening tool underneath and around the perimeter of the bottom cover.
-
Once unclipped, remove the bottom cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 0.7mm Phillips #00 screws from the battery and unplug the battery from the motherboard.
-
Lift the battery out of the case.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to flip up the retaining flap on the hard drive ribbon cable ZIF socket.
-
Pull the ribbon cable out of the socket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the hard drive up and out of the laptop.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.