Introduzione

The display is the main interaction with the user providing image. This outline will show you how to remove and replace the display from the device.

  1. Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
    • Remove the ten 7mm Phillips #0 screws from the bottom.

  2. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
    • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

  3. Remove the two 5mm Phillips #0 screws from the battery. Remove the two 5mm Phillips #0 screws from the battery.
    • Remove the two 5mm Phillips #0 screws from the battery.

  4. Use a spudger to flip up the retaining flaps on the  ribbon cable ZIF sockets. Remove the ribbon cables from the sockets. Remove the ribbon cables from the sockets.
    • Use a spudger to flip up the retaining flaps on the ribbon cable ZIF sockets.

    • Remove the ribbon cables from the sockets.

  5. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  6. Disconnect the battery from the motherboard. Remove the battery. Remove the battery.
    • Disconnect the battery from the motherboard.

    • Remove the battery.

  7. The battery is installed in these pictures but should always be removed before any part replacement. Remove the four 5mm Phillips #0 screws from the display hinge.
    • The battery is installed in these pictures but should always be removed before any part replacement.

    • Remove the four 5mm Phillips #0 screws from the display hinge.

  8. Disconnect the two antenna cables from the Wi-fi card. Disconnect the two antenna cables from the Wi-fi card.
    • Disconnect the two antenna cables from the Wi-fi card.

  9. Disconnect the display cable by pulling it down and towards you. Disconnect the display cable by pulling it down and towards you.
    • Disconnect the display cable by pulling it down and towards you.

  10. Lift the bottom half of the computer away from the screen while keeping the screen flat on the table surface. This will allow the hinges holding the screen in place to lift up.
    • Lift the bottom half of the computer away from the screen while keeping the screen flat on the table surface.

    • This will allow the hinges holding the screen in place to lift up.

  11. While the screen is flat on the surface, slide the bottom half of the computer towards the top of the screen to separate the two halves.
    • While the screen is flat on the surface, slide the bottom half of the computer towards the top of the screen to separate the two halves.

    • The screen is now completely removed from the bottom half of the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Joseph

Membro da: 25/01/2018

589 Reputazione

6 Guide realizzate

Team

USF Tampa, Team S20-G1, Passmore Spring 2018 Membro di USF Tampa, Team S20-G1, Passmore Spring 2018

USFT-PASSMORE-S18S20G1

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 36

Tutti i Tempi: 338