Introduzione

The battery is a key component to giving the laptop power. Without the battery there will be no power for the laptop to function properly. This guide will show you how to remove and replace the battery.

Remove the ten 7mm Phillips #0 screws from the bottom.
  • Remove the ten 7mm Phillips #0 screws from the bottom.

Aggiungi Commento

Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
  • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

Aggiungi Commento

  • Remove the two 5mm Phillips #0 screws from the battery.

Aggiungi Commento

  • Use a spudger to flip up the retaining flaps on the ribbon cable ZIF sockets.

  • Remove the ribbon cables from the sockets.

Aggiungi Commento

  • Disconnect the battery from the motherboard.

  • Remove the battery.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Joseph

Membro da: 25/01/2018

565 Reputazione

6 Guide realizzate

Team

USF Tampa, Team S20-G1, Passmore Spring 2018 Membro di USF Tampa, Team S20-G1, Passmore Spring 2018

USFT-PASSMORE-S18S20G1

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 27

Tutti i Tempi: 100