Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Philips #1 screwdriver to remove the nine screws from the back cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the laptop over and open the display.
-
Insert the flat edge of the spudger into the crease of the keyboard cover.
-
While the spudger is in the crease, carefully pry open the casing by sliding the spudger along the edge.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slowly lift the cover open from the front of the laptop, but do not completely remove it.
-
Note the locations of the three white and blue data cables connecting to the keyboard to the computer's main board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the three data cables from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the fully disconnected keyboard module from the laptop.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.
3 Commenti
where can I get a keyboard replacement
Replacement Keyboard N2840 s/n EBNOCX62041047D sold by, Alpha Vr Electronics, 860-755-2309 ext. 22831 $20.99