Wiki con Collaborazione Studenti
Un fantastico team di studenti del nostro programma educativo ha realizzato questo wiki.
Jura E8 15109 Troubleshooting
How to fix common issues found in the Jura E8 15109.
Coffee has no/very little frothed milk.
Insufficient foam is produced when the milk is frothed or milk sprays out of the professional fine foam frother.
Frother is dirty
The fine foam frother is dirty and needs to be cleaned. To do this, set the system to “rinse the milk system” then place a receptacle under the fine foam frother. dismantle and rinse the fine foam frother with warm water or the provided jura cleaning agent. To avoid this problem Jura recommends that you rinse the fine foam frother through its operations once every day after milk is used in the frother.
___________________________________________________________
When the water tank is full but “fill water tank” is still displayed.
There is a lot of limescale accumulated in the water tank causing it to display “fill water tank” even when the tank is full.
Limescale may have over accumulated
To descale the water tank you will need to remove the water tank. When and if using a CLEARYL smart filter cartridge remove it. Completely fill the water tank followed by dissolving 3 JURA descaling tablets in it and letting it sit for several hours (overnight). Empty the water tank and rinse it thoroughly. If you use a “CLEARYL” Smart filter cartridge, insert this again. Fill the water tank with fresh, cold water and reinsert the tank.
___________________________________________________________
Coffee flow is inconsistent
When making a cup of coffee the flow from the main spout is dripping slowly or even spraying
The water hardness may not have been correctly set
Set the grinder to a coarser setting. Alternatively, try to perform descaling.
Coffee spout is dirty
Make sure the coffee machine is off and unplugged. Let the machine sit for an hour until cool to the touch. Carefully remove the spout and clean.
______________________________________________________________________
Machine makes ticking and rattling noise
Grinder is making very loud noise
Object is stuck in grinder
This loud noise occurs when a foreign object becomes lodged in the grinder. One option to fix this situation involves; turning off the Jura E8 coffee maker, unplugging it from the wall, and carefully checking the grinder where the jam is.
______________________________________________________________________
Machine is cold to the touch and will not work
The coffee machine will not process the order because the safety system has been activated. (The machine reads Error 2 or Error 5)
Machine has been exposed to cold for a long period of time
If the machine has been exposed to the cold for a long period of time, heating may be disabled for safety reasons. To fix this issue, bring the machine to room temperature (60℉) slowly.
______________________________________________________________________
27 Commenti
I just purchased this machine & after making a cup of espresso or coffee, the bottom tray has water in it. I have other coffee/espresso makers that the only way water goes into tray is if there is no cup to catch the water. Is this normal for this brand Jura E8?
amy4hohensee - Replica
My E8 is brand new and the first time I tested the frothing it frothed very little and sprayed all over the machine. I performed the rinsing of the milking system as per instructions. Did not result in any changes.
Linda Birnie - Replica
Buzzing noise after brewing
C Fuller - Replica
When the drip tray is in it says empty drip tray, after emptying and putting back in it says drip tray not fitted correctly. I need to delicately fiddle with it until it’s in the exact correct spot for it to work?? It seems to be getting more and more sensitive
Marc Devisse - Replica
Hi Marc, I had the same but in reality it is not what you think. First remark, you can avoid this by drying the two metal contacts at the end of the water collect pins. ( in the water collect bin) If they connect via water then it will display Full. So this is something you should think of. But the most important thing is something else. You should remind yourself that you only clean the water and dirt when the coffee machine is switched ON. Reson for this is if you empty the tray with dirt or water it is not seen by the machine when you do this if the system is switched off. So next time your coffee machine prompts for empty the tray. you should do this when system detects that you opened the bin. Otherwise aldo you just cleaned it, it stays prompting clean tray. Also note every time you open the dirt tray you have to clean/empty it as the machine things you did. When you take that into account you will not be falls prompt again (unless the two metal plates in the back are full with dirt (shortcuted)
s Kasteren van -
My forget doesn't foam much anymore. I disassemble frother in it's parts and rinse parts under water as per all youtube videos every time after I use it which is weekend. I run the milk system cleaning program every evening after usage of the frother. I do all other cleaning program cycles as soon as prompted and change filter regularly even though I use filtered water. I do everything by book. What else could i this of to make the frother foam again?
Andree Herscovici - Replica
Machine says filling machine cannot remove drip tray cannot change from filling machine
flpeterson3 - Replica
I have the hardest time decalcifying the Jura E8. It asks for the tablet in the tank, after I've changed the drip tray, fill water tank, etc. When I drop the tablet in the tank, it won't acknowledge it. I after waiting for a while, I turn it off, and start all over again, I'll redo everything, following every step, using only J it ra products, and yet, it won't work. Phrase advice :)
PRISCA CRAWFORD - Replica
I Am experienced the same problem so I wonder of you found an solution ?
Thanks
fam urbanus -
The frother works, but the milk is not hot. I have no idea what to do!
Joy Irvin - Replica
My e8 coffee machine is turning off before the set time. Has anybody experienced a. this?
Kathi & Mark Mansfield - Replica
My e8 coffee machine tries to turn off after the prescribed time. It makes all the appropriate noise but water does not come out. Instead, it resets itself as if I just turned it on.
Isabelle - Replica
My jura says” System Filling” but it is not filling properly. Something is clogged. Any thoughts on how to clean it inside?
mary jo - Replica
Machine not rinsing? When I go to turn off my machine, when it switches to rinsing the internal units it sounds like the pump is humming/vibrating but it won’t rinse anything and the progress bar gets stuck only half-way followed by reverting to ‘machine is heating’. The machine does not actually turn off after this, instead I have to press ‘off’ again, which immediately turns the machine off with no further actions. My machine is 3-4 years old and it only recently started doing this.
Travis Sunderland - Replica
E 8 machine says open tap. I open it and a little water squirts out. It then says close tap. When I do that, the machine says ready. When I press to brew, the beans grind and the machine makes noise like it’s trying to brew but only a little brew drips out. The machine immediately says open tap. This cycle continues with brew never coming out until machine runs out of water or beans. Any thoughts or just toss it?
Vince - Replica
I accidently opened the drip tray while the cleaning process was going ( I forgot to put the container on the tray) now I cannot get the drip tray back in as there is black plastic flap that is stopping the tray from sliding in. The only prompt on the screen is saying put the drip tray back in but it gets stopped by this plastic flap. Please help as my machine is brand new. :(
Angela Ellis - Replica
Put the drip tray back without the grounds container and then take it back out and it should go
Joan C Farmer -
My Jura E8 is around 5 years old now. I love my machine but The milk is never hot enough and I have to put cup in microwave for 40 seconds. Why isn’t there a setting you can change for MILK as only settings for the coffee itself. Annoying. I also have a leak on right hand side under machine. I have googled that it is probably the seals which I will have to look into where to order.
chriscarey57 - Replica
I was attempting to use the Jura 8 ECleaning tablets. Put one in when guided from the touch screen. Red message appears -----CLOSE DOOR--Not sure what to do. I can't get passed message, even powered down and restated machine. Help please
dawnmdevereux - Replica
We had the same problem, only to find out that there is a tiny magnet installed in the flap of the top of the container where you put the ground coffee (at the top, back of the machine). I found the magnet in the used coffee tray and glued it back and it solved the problem.
Hope you can find it too.
Albin Paduch -
descaling process stalls, mid sequence. I have tried to restart with just water with same result.
Would a hard reset solve the problem?
Daniel - Replica
Trying to set up mu Jura E8, up to System filling … press Next and the LED screen it just goes back to System Filling. Yes has water, yes has filter and filter top, yes is inserted correctly.
What can I do)
Trixie M - Replica
Did you just get the machine and are trying to set it up. Not sure what you mean by "trying to set up .... to System filling?
Linda Birnie - Replica
My Ena8 makes a loud clunking noise when I turn it on. Sounds like something is hitting something. After that it works as normal
Larry - Replica
Ground coffee not working on Jura e8 it’s just coughs a little gobies through the motions then there’s a small amount of coffee in the cup
Giuseppe - Replica
Meine Jura S8 macht keinen Schaum mehr , zieht keine Wasser ider Milch mehr um Schaum zu machen , wer kann mir helfen bitte , ich bedanke mich im voraus.
Messenger Eleringer Carmen
Ehleringer Carmen - Replica
"Carefully remove the spout and clean." And how does one remove the coffee spout? No instructions from Jura on this topic.
Ron LaPedis - Replica