Le Mie Guide Preferite
Pagina 1 di 2
Problems with the lcd screen after changing motherboard /charging portHello, i recently changed the motherboard and charging port on samsung galaxy s4 I337. The phone will charge, but it will cut...
Samsung grand prime smg530A is changing screenAfter having a shattered lcd and digitizer screen and replacing the motherboard. The phone will power on (the motherboard had...
Silver tape over wifi antennasAfter following the steps to remove the old digitizer and lcd screen ( for the first time) I came to a sudden stop. No where ...
Only back light ,no picture on LCDHelp!! I have replaced the complete screen assembly twice. The first time I was able to get a picture and some what of a resp...
Rispondi a: Why my touch screen is not working?There's a ribbon that goes from the touchscreen/digitizer over the top of the lcd screen and slips into a connector clip. Really small!! This might have become lose,or actually broken. Also at the top of the lcd screen there's 3 little solder connectors ( ÷ and - ) if these solder become loose it will also prevent the screen from being responsive to the touch but display will work fine. Hope this helps
Rispondi a: stripped iPhone 4 battery screwI have the screw out I just need to know how I'm suppose to screw down the battery connector Iphone 4