Huge GEEK! I love anything that has to do with electronics and computer softwares. I learned everything I know about repairing electronics from iFixit Videos. Repairing electronics and programming apps aren't just my hobbies, they are my life. I joined iFixit to contribute to a community of people with the same interests as me, and help others with their repairs and encourage them to test their ideas. I am not afraid to ask questions, and always encourage people to look for answers to their problems. I hope I can do as much as possible to improve this community, and improve the world of electronics repair!
Guide alle quali Ho Contribuito
Rispondi a: Battery Won't Charge After Dock Connector Replacement?The Answer: Possible Solutions: (1) iPhone 4's have water damage indicators, one which you can find by looking into the dock connector charging port through the iPhone case. If the red, or pink button, depending on your model, popped up, then the phone has been submerged for more than 4 seconds. If this is the case, use compressed air, or an iFixIt dust blower, found here. It is a great tool, and could help you dry the connector. (2) You said that you spilled water on the charger, so try replacing the charger if the above suggestion didn't work. This could very well be the answer. (3) Cleaning the connectors with Windex is not the best idea. Use a special liquid formula for it. Conclusion: I apologize for my lack of knowledge on the subject, I do not quite understand your situation. Hope my suggestions can help, and good luck with your future repairs!