Post addition was never accepted:
Be aware that you must transfer the wireless charging coil flex and any other accompanying flexes to your new back glass. If this is not done your device will not save photos taken with flash.

You should only need to transfer the wireless charging assembly including the flash. Not sure if the microphone is attached to that as I hadn't seen it often.

However if it is connected to the wireless charging assembly and flash let me know.

You may click the button to view the unverified version of this guide as I have added a couple notes about this, but they haven't been verified by an admin yet.

FYI everyone:
On the 14 models the back glass assembly has the charging coil and other parts paired, you must transfer these or else photos with flash on wont save!

You need to transfer the charging coil and any parts adhered to the back glass as they are paired.

Thanks for the tip. Same thing happened to me, some leftover adhesive was in the way!

These screws are not magnetized! If you are trying to put them back, use some tweezers to align them, and while still using the tweezers, grab your standoff driver and push down, then you can screw it in with ease.

Thanks for the tip!

I would recommend the pro tech toolkit, handles all my needs for repairing.

Extremely difficult.

Help. This is too difficult.