After HD replaced with SSD video looks like really bad VGA / whitedoutLate 2009 imac Intel EMC 2308 replaced Western D hard drive (500GB) with 1TB Crucial SSD. I just bought the kit and...
Rispondi a "After HD replaced with SSD video looks like really bad VGA / whitedout"I figured it out. I hope this will help someone else in the future. Fix: Check all the LCD connections for dust and being in its proper place. What I did: So I carefully removed the glass, and started to remove all the LCD connections again per the hd fixit replacement manual instructions. When I got to the point of the LCD ribbon I noticed a few things. 1, it was a hair out of square with the receptacle. 2 When I removed it there was a spec of dust on the ribbon connector itself. 3. I had noticed that there was a sticky part of the ribbon which was previously connected or stuck (tape like stuff) to the main board area just near the hard drive space. I gently pressed that back into place. Solution: I removed the spec of dust, made sure the ribbon was squarely connected. and as previously mentioned pressed the sticky tape down before connecting all of the other connectors. I also checked all of the other connections before putting them back together. Put the LCD back into place with the screws. I tested it...