Fernando... if you can provide some details please? It would help. Thanks, Terry

Hi, I've replaced dozens of iPad 2 digis and the first couple tries, the cable did fold right there on the left side and it shouldn't. Here's a tip that I now use for each one and it works great... first, some people affix the new adhesives to the main frame but I secure them to the underside of the glass. Then I peel up the edge of each one just enough to be able to pull them off one at a time before I begin lowering the digi down to the main housing. When laying in the lcd, I get as much of the digi cable under the lcd as I can while installing the 4 screws. (The device shouldn't be open more than 90 degrees from this point on) I make sure the cable is going straight down all the way next to the edge of the lcd - NO FOLDS! It may take some "rocking" back and forth of the digi to feed it down, but you'll feel it sliding in as you close it like a book, and it will make a much better adhesion. Secondly closing it up - secure the right side of the digi inside the edge of the plastic frame first, then do the...

Start with getting a new home button with flex cable - only about $5 on ebay. It's an easy fix. (iPhonesfixed)

I repaired a power button on a 4 for a client who had dropped her iPhone on the button itself and it no longer "clicked", and it also cracked the screen. The button on the inside of the phone should have a tiny orange "nub" on it which produces the click. Sometimes they fall off so I removed the cable with the button assembly and saw that hers was still there, but it would not work. Also the assembly appeared to be bent at the midpoint so I straightened it best I could and put a couple layers of tape on the button to build it up a little more. I used a hole punch to make the tape pieces round, and they fit just right. After reassembling, the button worked satisfactory.... (iPhonesfixed)

Look for a glass fragment left behind by the original stuck to the adhesive at either the top or bottom end of the frame. I buy the cheapest ones I can find and they fit very good.