Annke CCTV has diedMy Annke CCTV was working fine till I stupidly plugged a USB mini fan into it. The fan ran for about 10 minutes then...
Rispondi a "Backlight not working anymore"I have similar issue. Same model A1398 but this one had drink spilled over it. At first when powered up it was clear things were not right, so I took it apart, cleaned everything, checked the P fuse all good. Now it powers up fine but no screen backlight. Faint Apple logo when light held to back of screen. HDMI output to monitor works fine. One thing looking through all the logic boards shown on here or anywhere else I can find my board has several different components compared to others. Were there different layouts between models. Would a logic board slightly different work ? As the P fuse is intact I’m assuming there is nothing else can be done. Picture shows a corner of my logic board where the P fuse is. Notice the green component next to it. That doesn’t appear on other boards from same model, plus some other components are different.