Zachary Lunte

I’m planning to use a Crest P1200HT ultrasonic cleaner with 2 gallons of distilled water and 200 mL of Branson EC to clean...

A while back I took the 2018 ACMT exam via Pearson Vue using a Tech ID, having first worked through the ATLAS training...

We opened up this machine to inspect the internals and found this strange tube floating freely inside the system. It was...

Machine was unable to power on. I tried an SMC reset, and the charger light changed so I know it went through and that the...

The machine has failed in a way that makes it unusable (shuts off when in use, soon after powering on). I believe the...

When connected to a 12W wall charger the iPad will power on and show the Apple logo for about 5 to 8 seconds and then it...

The main issue here is that sometimes during boot up it fails and shows the prohibitory symbol (circle with slash through...

The machine itself will not power on. I have tried an SMC reset, but it had no effect. I’ve tried multiple chargers in all...

I recently replaced the top case on a MacBook (Retina, 12-inch, Early 2015). The original top case had sticky keys and I...

I’m assuming the issue is caused by a damaged display and that I would need to replace the display assembly to resolve the...

If you look at the batteries, the design is significantly different, meaning they can’t be swapped.

Not sure if this will help but here is a similar question. It seems to be for a different logic board spec but the same general model of iMac. Check out the answers there and you may find the information you’re looking for!

Towards the end of this iFixit article they state that you “can replace or upgrade the socketed (LGA 1200) CPU.” In other words, I think you can!

If you inspect the two logic boards (Board 1 and Board 2) for differences in these pictures, you’ll notice that many of the cable connections to the logic board are of a different style or in different locations. This means you cannot swap the boards in these machines.

Can you verify that you installed a 2018-2019 display? If you check here they mention the following: “2017 Screen will work on 2018 model but it will glitch during boot + no truetone.” That sounds similar to your symptoms. Otherwise I would be inclined to think the display you got has a defect.

From the video it sounds like the noise could be the result of something underneath the power button keycap, but that would not explain your other symptoms. Where does the noise seem to come from within the machine? Is it loudest near the power button itself or near some other component? The only other moving part in your system is the fan, so it might be a good idea to remove the bottom panel, open the machine on its side, and observe the fan when hitting the power button. Another possible theory is that when you're trying to power on the machine, the system is actually already on but in a frozen sleep state. So in other words, when you hold down the power button to start it you're actually forcing the frozen system to power off (Mac has a feature where if you hold the power button for about 5 second it forces the machine to power off). Forcing the machine to power off like this sometimes produces a click noise (I think this is because the fan suddenly stops). You can check to see if the system is...

Try disconnecting the display cable, inspecting the pins both on the cable side and the port side for damage, dusting them with compressed air, then carefully reseat the cable. If that doesn’t help, you can try replacing the cable itself (cheaper than replacing the display). In my experience though, this specific visual glitch is normally due to damage to the display assembly itself and not an issue with the display cable. It may also be worth checking with an external monitor to verify the issue is not with the graphics, but rather the hardware of the display. My best guess is that the display assembly itself is damaged and would need to be replaced.

Someone posted a very similar question a while back. They decided to replace the display assembly and this fixed the issue. Here’s the other internal display only works when an external display is connected.

In Step 4 of this teardown you can see that the LCD cable in the 2019 differs from the 2017. You can find the 2019 displays from individual sellers online, here’s a link to an eBay post. Hope this helps!

Here are some things you can try: 1) With the charger plugged in, press and hold the power button for about 10 seconds. Then press the power button again. If the machine still does not power on, move onto the next step 2) Attempt to reset the SMC. After resetting the SMC, attempt to power on. If you still aren’t able to power on, move onto the next step 3) Try using a separate known-good charger. If you don’t have access to a charger you can take it to a tech shop and ask them if they can try to charge it as a free service. If it charges using a separate charger there may be an issue with your charger and it might need to be replaced. If none of these steps work for you there may be a hardware issue with your machine. If that’s the case I would recommend having it diagnosed by a Mac repair shop. If you’re feeling adventurous you can try disconnecting and reconnecting the battery, but be forewarned that these models can be a little tricky to open safely. Here’s a guide for accessing the battery.