Albert

I just noticed that there’s a notification said “Send: checking drive permission” when I send email via Google Gmail on my Wi...

My hard drive has 32gb and I encountered the error while tried to restore the settings back to factory settings. Please let m...

The live tile does not display the products on the current version or release of the MS Store. Is there anything wrong?

Apple admitted that is was slowing down older iPhones in order to preserve battery life and avoid crashes. But this informati...

My iPhone 7 rang, and there's a loud hissing noise that really scared me. What's wrong with that? And how can I fix the probl...

I was getting this message too whenever my iPhone restarts. Even though iMessage on my iPhone was working as expected as I wa...

One of my friends recently updated his iPhone 7 to iOS 11, something strange has happened. He had lost the contacts. He canno...

Apple does really disturb me when my iPhone pops up notification to upgrade to the latest iOS. It said that iOS 11 is not so ...

Charge your device for at least 30 minutes and try to restart your device again: (1) Press and hold the Power button for 40 seconds. (2) If the device restarts before 40 seconds has passed, release the Power button. (3) If the device doesn’t restart, release the Power button, and then press the Power button again to turn on the device. If the issue persists, attempt to Factory Reset using the built in device recovery mode: (1) Power device down completely via the Power Button. If the device is unresponsive to the 2-second Power Button press, attempt the 40-second Power Button press, which should cause full shutdown. (2) Make sure your device screen is completely off with no activity. (3) Enter Recovery Mode by pressing and holding Power+Volume Down for 5 seconds. (4) Once in recovery mode, use the volume keys to navigate to "wipe data/factory reset," and the power button to select it. Please note that a factory reset will remove any content you have downloaded to your tablet.

Once your build reaches the license expiration date, your computer will automatically reboot approximately every 3 hours. As a result of this, any unsaved data or files you may be working on, will be lost. The computer will no longer boot, 2 weeks after the license has expired. After the expiration date is crossed, when you start your computer, you will see a Recovery message – Your PC/Device needs to be repaired message. You will not be able to log in to your computer. In this case, you will have to download the ISO file from another computer and then transfer the ISO file to some installation media. Once you have done this, you will have to boot the computer from the installation media to install the latest build of Windows 10. You should always backup all your data and check your Windows Update to see if any new build or upgrades are available.

Follow the step-by-step method and see if it works. (1) First, while the computer is off, connect an external monitor. (2) Next turn on the computer and allow it to fully load. (3) Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher". (4) In here select "Computer only". (5) Now shut down the computer and disconnect the external monitor. (6) Disconnect the external monitor (7) And finally restart the computer.

If you made one already then you are very lucky and the following steps can easily reset your Toshiba laptop password with that disk: Step 1: Plug in the password-reset disk and reboot your laptop. When the welcome screen appears, simply click on "Reset Password…" located right under empty password field. Step 2: A new password reset wizard will open, click on "Next" once. Choose the driver where the password reset disk is situated. Setup a new password and click on "next". Step 3: Finish the setup wizard and restart your computer. Now, simply enter the new password when asked and you will be able to enter into your laptop normally. A kindly remind: The password-reset disk can be only used to reset password on the computer that created the reset disk. It can't reset password on other computers. If you are unlucky to not make a disk, you may try to make a fresh installation of your Windows. A quick reminder: You’d better back up your computer before any reset or re-installation.

This smartphone has a built in GPS receiver, which is in the mainboard, which is everything in line with the cameras/flash and higher. You can check out the entire teardown from iFixit by Tobias Isakeit here below! Smontaggio Huawei P20 Pro

It's a possibility the flashing amber/white light means battery is low and isn't being charge. You may check the status of the battery and AC adapter in the BIOS. 1. Power off computer, and then make sure AC adapter is connected to computer well 2. Power on computer, quickly start tapping the F2 key continuously, you should be in the BIOS screen. Under the main screen, look for the AC adapter type. If the adapter says None or Unknown then it's an issue with the adapter. Suggest you replace AC adapter. Under the Advanced screen, look for Battery Health, it should say "This Battery Is Performing Normally". If there's any other message, it could mean that the battery is faulty and needs replacement. Note: If you indeed need replacement, please get a new genuine Dell battery that comparable with your system.

Start->Control Panel->Power Options->Choose when to turn off the display->In the Turn off the display drop-down menu select Never->Save Changes

If it is less than a year it should be covered by warranty. If so contact Sony and tell them it stopped working. You most likely have damaged your HDMI connector but that could be put down to wear rather than impact as long as there is no visible damage to the case. It may come back to life if you boot into safe mode and perform some system maintenance, maybe the system needs restored, rebuilt etc but I doubt it. Sony should be mice to you if it is in warranty still. Check out these tips and see if they work. https://www.partitionwizard.com/partitio...-cant-read-usb.html https://ps4.wonderhowto.com/how-to/ps4-wont-connect-your-tv-try-these-no-signal-troubleshooting-tips-0149511/ https://www.ubreakifix.com/blog/fix-hdmi-port-ps4

It’s either your device has acquired some damage to any of the display components or could also be that some of your apps have crashed and eventually caused your device to become unresponsive. Below is a list of possible solutions and recommended workarounds you can refer to when troubleshooting a problem on slow touchscreen response or frozen screen with your iPhone 8 Plus. Method 1: Restart or force restart. Method 2: Check and manage display settings. Method 3: Manage internal memory. Method 4: Factory reset/master reset. If the problem started after putting in some third-party casing or screen protectors on your iPhone, then try to remove them and see how your touchscreen works without these accessories.

Check out the thread below and see if it works. http://www.wikiforu.com/2013/03/how-to-reset-unlock-iview-tablet.html