MAC & PC Sameday Onsite Repair, Replacement,...
Evento | Conteggio | Delta |
---|---|---|
Qualcuno ha completato la tua guida | 7 | 21 |
Accettata modifica di controllo a passo | 2 | 2 |
Accettata modifica di controllo a passo | 1 | 1 |
Accettata modifica di controllo a guida | 1 | 1 |
I agree with mckenziemardelli and ALOS that the combined antenna cables are “clamped” and retained by two of the right hinge screws.
What about the screws on the right hinge?
In my case, the left side corner of the PS was caught against the Lower Support Bracket, and I had to remove the LSB in order to get the PS freed and out.
I think the author Walter Galan should put this in the main section of his instructions. I have TWO identical iMac 14,1 / i5 2.7GHz / 21 Inch Late 2013 / Order ME086LL/A. They both required removing the LSB. Thank you very much Walter Galan & others for your contributions.
In my case, the left side corner of the PS was caught against the Lower Support Bracket, and I had to remove the LSB in order to get the PS freed and out.
I think the author Walter Galan should put this in the main section of his instructions. I have TWO identical iMac 14,1 / i5 2.7GHz / 21 Inch Late 2013 / Order ME086LL/A. They both required removing the LSB. Thank you very much Walter Galan & others for your contributions.
bstaud - The display power cable has two squeezable levers on each end of the cable’s width.
Squeeze the left lever with your thumb while you simultaneously squeeze the right lever with your
index finger, and gently pull the cable straight back and out, and the cable comes out very easily.
Thank you very much for doing this. I had been turning away business on this MBA 2018.
So sorry. Thanks for that caution.