Le tue impostazioni
Leonard, you’re absolutely correct. Tightening the truss rod (clockwise) provides RELIEF from the neck bow with tuned strings installed. It counteracts that tendency to bend the neck, straightening it out. You do need a little bend/bowing to help avoid some fret buzz. These instructions are also missing the steps on how to measure with a feeler gauge at around the 8th Fret, with a Capo installed behind the First fret and holding the lowest string (B string) below the lowest fret. In all, I would not follow these instructions here at all!
On my phone, the screws were DEFINITELY T4. My advise? Try T4 first. If it's too big, nothing lost.
I nearly stripped the head on one of mine with my T3 bit because it was too small to get traction.
Quando lo avranno fatto, sarai in grado di visualizzare un grafico della reputazione guadagnata nel tempo da loro.
Ecco un'anteprima di come il grafico apparirà:
Ancora nessuna reputazione acquisita.