Strumenti necessari in questo Smontaggio

Introduzione

This guide explains how to take apart the standard Tesco Value Kettle, so you can see its internal parts.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Tesco Value JK07 Kettle, usa il nostro manuale di assistenza.

Take your kettle and remove it from the base. Carefully remove the limescale filter by sliding it out from the lip.
  • Take your kettle and remove it from the base.

  • Carefully remove the limescale filter by sliding it out from the lip.

Aggiungi Commento

Remove the screw from the bottom side of the lid. Disassemble the lid and remove the plastic piece inside. Disassemble the lid and remove the plastic piece inside.
  • Remove the screw from the bottom side of the lid.

  • Disassemble the lid and remove the plastic piece inside.

Aggiungi Commento

Remove the button that opens the lid by sliding it out.
  • Remove the button that opens the lid by sliding it out.

Aggiungi Commento

Remove the screws on the underside of the kettle to release the socket cover. Separate the handle from the kettle.
  • Remove the screws on the underside of the kettle to release the socket cover.

  • Separate the handle from the kettle.

Aggiungi Commento

Remove the screws to separate the handle and the lid from the hinge. Remove the screws to separate the handle and the lid from the hinge.
  • Remove the screws to separate the handle and the lid from the hinge.

Aggiungi Commento

Gently remove the switch cover. Remove the circular piece attached to the switch base  by gently pulling it away. Remove the circular piece attached to the switch base  by gently pulling it away.
  • Gently remove the switch cover.

  • Remove the circular piece attached to the switch base by gently pulling it away.

Aggiungi Commento

Remove the screws from the socket at the back of the kettle. These screws also hold the socket together, so once they have been removed, it can be opened.
  • Remove the screws from the socket at the back of the kettle.

  • These screws also hold the socket together, so once they have been removed, it can be opened.

  • The components within the socket are clipped in. Remove the components by gently pulling.

Aggiungi Commento

Remove the heating element. Remove the gasket.
  • Remove the heating element.

  • Remove the gasket.

  • Remove the plate beneath the heating element by bending the metal in the holes as shown in the picture. Remove the plate from the clips.

Aggiungi Commento

Remove all the screws from the bottom, then gently separate the two halves.
  • Remove all the screws from the bottom, then gently separate the two halves.

Aggiungi Commento

Then push the feet (B) out from the base (C).
  • Then push the feet (B) out from the base (C).

Aggiungi Commento

The plug and cable (G) are held in by clips and can be pulled away.
  • The plug and cable (G) are held in by clips and can be pulled away.

  • The fuse (F) can be pulled away from inside the pins on the plug (G).

Aggiungi Commento

The kettle is now fully disassembled.
  • The kettle is now fully disassembled.

  • There should be 26 separate parts, all shown here in this photo.

Aggiungi Commento

emily king

Membro da: 17/03/2010

21 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 14

Tutti i Tempi: 6,207