Strumenti necessari in questo Smontaggio

Introduzione

I'm going to dissect an old friend, my first disc player. It is hoped that this teardown, while exposing the hydro-suspension and green-amber lighting, will reveal an awesomeness worthy of a Sony PS3 Slim (Gadget Lab Contest).

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Sony D-822K Car Discman, usa il nostro manuale di assistenza.

Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.
  • Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.

My gosh until now I totally forgot about this player, I had the exact same one for years !

Below - Replica

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

IanMaffett - Replica

Quote from IanMaffett:

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

It was expensive, wasn't it? I was expecting a little more sophistication in the suspension for the price.

modem21 - Replica

Oh, last week I found that missing illumination switch. When I put in, I'll try to fix the whining sound from the headphone output.

modem21 - Replica

Position unit so that the bottom is facing up. Remove the 6 screws.
  • Position unit so that the bottom is facing up. Remove the 6 screws.

  • Hold top and bottom of unit together as you turn the unit over, bottom facing down. Use caution; the upper and lower case, along with circuit board are now loose.

  • Watch out for the AVLS and illumination switches, they love to disappear when unsupervised. Remove top of case.

Aggiungi Commento

Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader. Slide edge of ribbon cable connector towards ribbon cable to disengage. Unplug the red, white, and blue plugs from the circuit board.
  • Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader.

  • Slide edge of ribbon cable connector towards ribbon cable to disengage.

  • Unplug the red, white, and blue plugs from the circuit board.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Observation: This is the Hydro Suspension system...really. Observation: This is the Hydro Suspension system...really.
  • Observation: This is the Hydro Suspension system...really.

Aggiungi Commento

Remove circuit board Notice the dual-color light modules. (I temporarily connected the power to show off the lights) Notice the dual-color light modules. (I temporarily connected the power to show off the lights)
  • Remove circuit board

  • Notice the dual-color light modules. (I temporarily connected the power to show off the lights)

Aggiungi Commento

Disconnect tailpiece, and power supply.
  • Disconnect tailpiece, and power supply.

Aggiungi Commento

Remote: Remove the 3 screws from the bottom. Pull apart. The function buttons have a neat overlay design.
  • Remote: Remove the 3 screws from the bottom. Pull apart.

  • The function buttons have a neat overlay design.

Aggiungi Commento

Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?
  • Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?

Aggiungi Commento

modem21

Membro da: 09/10/2009

84 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 16,422